¤ý New design for high-speed production.
¤ý Applicable for all kinds of tubes such as Poly, PE and Lami-tube.
¤ý The reasonable design for high speed production makes safe drive possible.
¤ý Process : Tube feeding —> Tube cleaning —> I-mark catching —>
Precise filling —>
Hot-air blowing —> Sealing & Coding —>
Trimming —>
Ejection. All steps are
automatic.
¤ý The cartridge type of tube magazine part makes possible whole-box-tube
loading onto
the tube magazine. (Large size tube box is option).
¤ý No error and safe I-mark detection could be done with the reinforced I-mark
catching
device on speed and processing system.
¤ý The filling amount deviation is minimized with a special treated filling valve.
¤ý Filling amount is controllable during operation without machine stopping
because of the
built-in servo unit for filling part (Option).
¤ý All content contact parts are completely made of SUS material.
¤ý With the upgraded hot-air blowing unit and sealing unit, the machine does
safe and
precise sealing.
¤ý Electronic control by PLC and inverter.
¤ý Touch screen makes easy and convenient operation. In addition, the presetting
data can
be recalled with easy by ML system - ML system- (Option).
¤ý Filling range : 3~250g (Option for over Φ60).
¤ý Working capacity : 80tubes/min. (max.)
¤ý Applicable tube :Standard for Φ10~Φ50mm (max) and 250mm
(height) Poly,
PE and Laminate Tubes (Option for over Φ60).
¤ý Heater : 3000W
¤ý Power : 220/380V, 8㎾, 3phase.
¤ý Air requirement : 5~6㎏f/㎠, 400ℓ/min or more.
¤ý Dimensions
: 1400mm(W) x 2100mm(L) x 2200mm(H)
- Safety device
1. No tube, no filling.
2. Over-load protection.
3. Emergency stop device.
4. No operation without compressed air.
5. No operation for window open.
6. Alam buzzer
- Option
¤ý Cartridge type tube magazine part (large)
¤ý Water-jacketed hopper.
¤ý Agitator
¤ý Servo system for filling amount regulation.
¤ý Gas injection device (pre-filling and/or after-filling)
¤ý Coding devices on both sides of the tube.
¤ý Round Cutting blade (Corner trimming device)
¤ý Ejection device for discharging tube depending on cap direction.
¤ý Touch Screen.
¤ý ML System (Memory and Loading System)
